Leading Film Faced Plywood Manufacturing

Contact Us
Home » Products » PANDAforest Tongue & Groove OSB
    PANDAforest Tongue & Groove OSB
    PANDAforest Tongue & Groove OSB

PANDAforest Tongue & Groove OSB

PANDAforest Tongue & Groove OSB ( T&G OSB ) is a highly engineered flooring panel made with three layers of micro-veneers that are cross-laid and hot-pressed using proven moisture-resistant resin systems. Fresh wood from managed forests is used, assuring that PANDAforest OSB is free of contamination.

  • PANDAforest Tongue & Groove OSB panels are suitable for use in structural timber construction and interior design applications, in particular structural subflooringwall, roofing and flooring. With features like our edge seal that resists edge swell, our easy-fit tongue-and-grove profile for sledgehammer-free installations.
  • Tongue & Groove OSB panel are engineered specifically to provide you with even faster installation and less waste at the jobsite.
Get A Quote
  • Anti-Skid Performance
  • Full Birch Material
  • Eco-Friendly environment
  • Custom design eveything

FEATURES & BENEFITS

◎ Faster and easier laying, saving time and cost
◎ High cost performance and low price.
◎ Smooth surface; no core voids, knots or splits.
◎ Good sound insulation, high stiffness and ability to withstand significant snow and wind loads allow to use.
◎ We have the flexibility to customize specific properties, lengths, widths.
◎ Edge seal helps prevent moisture intrusion and water-related issues that can lead to call backs.
◎ Suitable for uses not permanently exposed to the weather (exposure 1 panel).
◎ Available in 8-ft, 9-ft and 10-ft lengths.
◎ Available in tongue and groove profile for easy installation
◎ Environmentally safe construction material.
◎ High strength and stiffness
◎ Strong and uniform consistency throughout.
◎ Support FSC and PEFC legally harvested resources. and is E1 emissions compliant.
◎ Support OEM/ ODM service.

END USE

◎ Wall Sheathing – interior and exterior walls. OSB panels can be used with all types of interior and exterior finishing materials
◎ Roof sheathing- OSB panels as an underlayment for shingles, concrete and metal tiling, slating and other roofing materials.
◎ Subfloor – can be used both as continuous flooring and load bearing joists
◎ Single floor – in light structures OSB panel can be used directly as flooring.
◎ Furniture –frames of upholstered furniture, chairs, cabinet furniture, home built-in furniture (coat closets, shelving units, wall wardrobes)
◎ I-joists – supporting floor and wall structures in timber houses.
◎ SIP panels – Manufacturing consisting of two outer OSB layers and a core polystyrene foam layer.
◎ Stiff basis – for thermal panels
◎ Formwork Plywood – Overlayed OSB panels can be used repeatedly as a concrete formwork.
◎ Plank – Stairs, landings, scaffoldings
◎ Fence – temporary construction site fencing.
◎ Partition wall – partition walls for ships and railcars
◎ Structures for auto vehicles, trailer floorings and truck bodies
◎ Packing – Shipping crates and pallets packing materis.
◎ Deck – shelving units, exhibition stands, furniture shelves, shop counters, table tops, bill boards.
◎ DIY

Versatility in Application

  • Vans Floor

    Vans Floor

  • Trailers Floor

    Trailers Floor

  • Construction Scaffolding

    Construction Scaffolding

  • Stages & Terraces

    Stages & Terraces

SPECIFICATIONS

Type Size Layer up Weight                     (kg/sheet) Core
Materials		 Packing
Unit
(sheets)
T&G 1220x2440x12mm cross-oriented 22.0  Mixed Combi 65 or 75
T&G 1220x2440x15mm cross-oriented 27.5  Mixed Combi 45 or 60
T&G 1220x2440x18mm cross-oriented 33.0  Mixed Combi 43 or 50
T&G 1220x2440x21mm cross-oriented 38.5  Mixed Combi 37 or 45
T&G 1220x2440x25mm cross-oriented 46.0  Mixed Combi 31 or 37
T&G 1220x2440x28mm cross-oriented 51.5  Mixed Combi 27 or 32

Apart from the regular standard dimensions of 1220mm x 2440mm, also special thickness lengths are available (thickness form 6mm-28mm, max lengrh 6000).
Special dimensions available by request – there may be requirements for minimum quantity per special dimension.

FORMALDEHYDE EMISSION：E0  ≤0.03
Layer up：Cross-oriented
Moisture Content：8% – 15% (at time of despatch)
Dimensional Tolerances：±0.3mm
Straightness：±1.5mm
Density：580 kg/m³ (approximately)
Adhesive：E0
Joint Group：For nails, bolts and screws
Finish：Unsanded faces, sanding / T&G / paint edges.
Branding：Each pallet of PANDAFOREST OSB is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards
Storage：Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation
Source：Plantation timber

OEM Service

We can provide OEM orders according to your requirements and work with you to build your own film faced plywood brand. Please contact our OEM Service Team.

Contact Us
PANDAforest Tongue & Groove OSB

You Might Also Like

View More