PANDAFOREST Structural LVL Beams E8

PANDAFOREST Structural LVL Beams E8 for use in Timber Framed Construction in Australia and New Zealand. It is suitable to be substituted in place of sawn timber as ordinary timber in timber framed buildings as an acceptable solution. And it is an ideal timber for all types of construction projects, renovation, new buildings, pre-fabricated houses and elements. PANDAFOREST Structural LVL Beams E8 is straight, and available in a limited range of smaller sectional sizes. The advantage excellent qualities include strength, dimensional stability and light weight.

PANDAFOREST Structural LVL E8 will meet the structural and durability requirements of the AU and NZ Building.

Get A Quote

DESCRIPTIONS

PANDAFOREST Structural LVL Beams E8 is made of about 2 mm thick parallel grained radiata pine veneers and bonded with weather and boil-resistant A-Bond adhesive.

PANDAFOREST Structural LVL Beams E8 beams available in a wide range of sectional sizes with the advantage of long length offerings.

PANDAFOREST Structural LVL Beams E8 is certied to conform to AS/NZS 4357 Structural laminated veneer lumber.

Standard Sizes&Specification

Thickness (mm)

Depth (mm)

100

120

130

140

170

190

200

240

290

300

360

400

450

√

Length Availability 3.6m, 4.2m, 4.8m, 5.4m, 6.0m, Other lengths are available by special manufacture up to 12m
* Available in lengths of 6.0m only
Special dimensions available by request – there may be requirements for minimum
quantity per special dimension

Veneer Thickness ：Constant through the product thickness
Joints：Scarf and / or butt jointed
Moisture Content：8% – 15% (at time of despatch)
Dimensional Tolerances：Available on request
Straightness：Available on request
Density：620 kg/m³ (approximately)
Adhesive：Phenolic – AS 2754.1
Bond：A Bond – AS/NZS 2098.2
Joint Group ：JD3 – for nails, bolts and screws
Finish：Unsanded faces, sawn edges and arrised edges.
Branding：Each piece of √ LVL is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards
Storage：Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation
Source：Plantation timber